Quick Diy Pitched Roof With Tarps

Then fold the excess tarp under a few rotations for a tight clean fit.

Quick diy pitched roof with tarps.

Let the rest of the tarp hang off the lower border of the roof that overhangs the wall known as the eave. Unfold the tarp on the roof. Screw the roll side down either at the edge of the roof or to the fascia with a few screws pulling the tarp tight around the edges apply 1 3 strapping with deck screws every 8 to 12 making sure you have one within 2 to 3 of each edge. There should be an additional 4 feet.

Sandwich the tarp by nailing a second 2 x 4 board to. Screw the 2 by 4 directly into the roof to secure it. The 2 by 4 should be about 2 feet longer than the tarp width. If you don t have a helper use the metal rings to hold down the tarp at the furthest four corners.

Place the sandwiched tarp along the eaves line and stretch the rest of the tarp goes over the ridge and down the other side of the roof. Create an anchor board by rolling the tarp s peak end with a 2 x 4 inch board and nailing the tarp to your board with. My gear list with purchase links. Roll the opposite end of the tarp around another 2 x 4 and sandwich the tarp with a second 2 x 4 and nail it to the roof sheathing roll side down.

There s a range of waterproof storm proof mildew resistant and uv stable roof tarps made from reinforced pvc materials. Never lay the tarp out during a storm. Next on the peak side attach the tarp to the 2 by 4 using cap nails. If you have a helper this part is easy.

Using more 2 x 4 s nail down the tarp s sides. Lay the tarp out flat over the roof. Try to pick a day that is not windy or else you may face frustration because as soon as you open the tarp up there it will start blowing all over the place. Tarpfactory tarps are made to withstand any severe condition of any type of roof roofing system such as flat roof sloping roof clay tiled roof metal roof pitched roof asphalt shingle roof etc.